Whether you are building a new piping project or renovating an older one, a lot of choices come when dealing with piping materials. If you are looking to improve your guttering system or redesign your house’s water drainage system, installing a guttering system is crucial to stop water from destroying your building’s foundation as well as prevent other unwanted mishaps such as erosion and leaks from occurring. If you reside in an area or country with a lot of rainfall, installing a proper guttering system is crucial. With only a few simple materials and tools, you can all by yourself install and create a system which will safely transport water and remove it.
Best areas to install
The best areas to install your guttering system depends on your house’s design, but a simple and effective design is always a safe practice. The guttering system which attaches below your roof needs to be slightly sloped at an angle in any direction to ensure that water delivery is effective. Nevertheless, try to install the gutters along the main parts of your house such as the main entrance or garage, and the downpipes away from them.
Try to keep the gutters and drains away from sensitive locations such as electrical components and the kind. Lead the system to the side or back of your house which can safely remove the water from your house’s critical areas. If an external drainage system is within reach, you can design your system to lead unto the drain. If you have a rainwater harvesting system, it would be even better to design your mini line guttering system which leads into that system.
How to install
Most of the mini line guttering supplies are generally designed for easy assembly and installing your own guttering system can save you quite a fair bit of costs. However, before you start purchasing and installing the necessary components for your guttering system, it would be wise to conduct a careful inspection of your building’s foundation. Look for miscellaneous components made of other materials that are not part of the guttering system which might need replacing or which are to be removed.
Make a sketch with careful measurements as to the length and width of your house in correspondence to the length of the gutters and downpipes which you will need to purchase later on. You might want to design a more complex drainage line with multiple sloped pipes and bends. Note as to where these mini line gutteringparts will be fitted and include the location of the downpipes. You will also need to purchase multiple hangers and elbows to connect your pipes and dispose of the water. Normally speaking, downpipes only require a single elbow in the outlet, but this depends on how you design your system. You might need more elbows if your house’s design is somewhat complex and you will need more bends.
After you have purchased the mini line guttering components by using the earlier measurements, it is time to install it. Make sure you have all the necessary tools and components and always wear protective gear.
- Firstly, you will need to fit the gutters. If you purchased seamless or preassembled gutters, make sure they have the ideal length in accordance to your prior planning, as you might have to cut and connect the gutters. The gutters are positioned slightly under your roof and will require hangers.
- When the gutters have been assembled, it is time to join the downpipes.If you need to cut some of the downpipes, local DIY stores usually sell specialised snipping tools for this operation. For best results, roof flashings are a good investment as they can provide added water protection and as a cosmetic addition. If you are adding multiple slopes, you might need to splice some of the pipes and join them with more bends.
- Lastly, you will need to install the outlets which connect to the downpipes which will lead to an external drain or a rainwater system.Try to avoid installing the outlet facing open surfaces such as open gardens or sidewalks as water is a destructive force.